Cruise control* - managing speed
The cruise control (CC – Cruise Control) helps the driver to maintain an even speed.
It is possible to activate, set and change the stored speed.
Activating and setting the speed
To enable cruise control:
- Press the steering wheel button for CRUISE (without speed limiter) or (with speed limiter).
> | The cruise control symbol (6) in the combined instrument panel illuminates - Cruise control is in standby mode. |
To activate cruise control:
- At the required speed - press the steering wheel button or .
> | The current speed is stored in the memory and the combined instrument panel's marking (5) illuminates at the selected speed and the symbol (6) changes from GREY to WHITE - the car then follows the stored speed. |
Note
Changing the stored speed
Stored speed is changed by pressing button or :
- Short presses give +/- 5 km/h.
or
- Hold down the button and release it at the required speed.
If speed is increased using the accelerator pedal prior to pressing the / button, then it is the car's current speed when the button is pressed that is stored. Last press made is stored in the memory.
A temporary increase in speed with the accelerator pedal, e.g. during overtaking, does not affect the cruise control setting - the car returns to the last stored speed when the accelerator pedal is released.