Messages - handling

Use the left-hand stalk switch to acknowledge and browse among messages that are shown in the information display of the combined instrument panel.

When a warning, information or indicator symbol illuminates, a corresponding message is shown in the display. An error message is stored in a memory list until the fault has been rectified.

Press OK on the left-hand stalk switch to acknowledge1 a message. Scroll through messages with the thumbwheel.

 Note

If a warning message appears while you are using the trip computer, the message must be read (press OK) before the previous activity can be resumed.
  1. 1 A message can also be acknowledged via the thumbwheel or RESET button.