7 결과

Audio and media - advanced audio settings*

업데이트됨 7/23/2018

Adapt the audio settings for radio and media according to your wishes.All the advanced audio settings are accessed by pressing SOUND in order to access the audio settings menu. Turn TUNE to scroll to Premium sound* and press OK/MENU.

Setting the audio volume for external audio source

업데이트됨 7/23/2018

Set the volume for an external audio source. If the volume is too high or too low then the quality of the sound may deteriorate.

Audio and media - audio settings

업데이트됨 7/23/2018

The audio system is pre-calibrated for optimal sound reproduction, but can be adapted to your needs.

Setting for optimal sound reproduction

The audio system is pre-calibrated for optimum sound reproduction by means of digital signal processing.

This calibration takes into account loudspeakers, amplifiers, passenger compartment acoustics, listener position etc. for each combination of car model and audio system.

There is also a dynamic calibration that takes into account the position of the volume control, radio reception and vehicle speed.

The controls explained in this owner's manual, e.g. Bass, Treble and Equalizer, are only intended for the user to be able to adapt the sound reproduction according to personal taste.

Audio quality when streaming audio from the Internet

The amount of data transferred is dependent on the services or apps that are used in the car. For example streaming audio can require large amounts of data which requires a good connection and good signal strength.

In some apps it is possible to set the audio quality. Selecting a high audio quality can increase loading time and cause breaks in the sound. In order to ensure a consistent sound experience it is recommended to select a lower audio quality.


도움이 되었나요?

Setting the audio volume and automatic volume control

업데이트됨 7/23/2018

Set the audio compensation for excessive noise in the passenger compartment.

Audio and media - general audio settings

업데이트됨 7/23/2018

General audio settings for the audio and media system.

Volume control for interrupting RDS-functions

업데이트됨 7/23/2018

The interrupting RDS-functions, e.g. alarm or traffic information (TP), are heard at the volume selected for each respective programme type. If the volume level is adjusted during the programme interruption, the new level is saved until the next programme interruption.

Setting the equaliser

업데이트됨 7/23/2018

Set the equaliser and adjust the volume separately for different radio frequencies or TV.