7 결과

Navigation* - operation

업데이트됨 7/23/2018

Basic operation of Sensus Navigation and examples of use.

Navigation* - voice recognition

업데이트됨 7/23/2018

Example of voice recognition control of the navigation system.

Navigation* - text and symbols in the screen

업데이트됨 7/23/2018

Explanation of text and symbols that may be shown on the map.

Navigation* - character wheel and keyboard

업데이트됨 7/23/2018

Use the character wheel or the centre console keypad for entering text and selecting options. For example, enter information about an address or a facility.

Navigation* - Real Time Traffic Information (RTTI)

업데이트됨 7/23/2018

With an Internet-connected car, real time traffic information can be received via the Internet with RTTI.

Navigation* - traffic information

업데이트됨 7/23/2018

The navigation system continuously receives traffic information transmitted via Traffic Message Channel (TMC) which is used for dynamic road directions. When situations that can affect the journey occur (e.g. accidents, road works) this is shown on the screen, and when a destination has been specified there is a recalculation of the route. Recalculation can take place automatically or require confirmation, see Reroute on request.

Sensus Navigation*

업데이트됨 7/23/2018

Basic description and overview of Sensus Navigation.

The navigation system calculates the route, travel time and distance to the selected destination. The system gives guidance and instructions for junctions, etc. If there is a deviation from the planned route outline during the journey then the system automatically calculates a new route outline.

The navigation system can be used without a destination being selected.

The system is supplied with default settings, but starts with the settings last used.

Volvo Sensus Navigation uses the reference system WGS84.

Points to remember

The navigation system provides road information which guides to a preset destination. However, not all of the recommended guidance is always reliable, since situations may arise that lie outside the capacity and judgement of the navigation system, such as sudden changes in the weather.

경고

Observe the following.

  • Direct all your attention to the road and make sure that all your concentration is on driving.
  • Follow applicable traffic legislation and drive with good judgment.
  • Due to weather conditions or time of year affecting the road conditions, some recommendations may be less reliable.

System overview

P3/P4-1517-Navi-Overview
Keypad in the steering wheel for menus, volume and voice recognition.
The screen displays maps and provides detailed information on route type, distance, menus, etc.
Control panel in centre console for activation of the navigation system, menus and volume.
USB connection.
Microphone for voice recognition.

Navigation system audio uses the front loudspeakers.

Remote control * can be used for all functions in the navigation system. The remote control's buttons have the same functions as the buttons in the centre console or steering wheel keypad.

Map overview

P3-1346-NAV-Melco 4in1

Examples of map images for the current position. Itinerary, junction map and scroll mode are some of the views the screen can show. NOTE: the illustrations are schematic - details may vary depending on software version and market.

The appearance of the screen depends on geographic position and the settings made, e.g. map scale and which POI options are selected to be shown.

Explanation of text, signs and symbols that may occur, see Navigation - text and symbols in the screen.

Three alternative route outlines can be calculated when an Itinerary is set, see Navigation - route options.
Detailed junction map - the left-hand section of the screen shows a detailed enlargement of the next junction. The situation is always supplemented with a voice message, see Navigation - route options.
Avoid a particular area, see Navigation - route options.
Scroll mode, see Navigation - operation.

도움이 되었나요?