매뉴얼을 확인하세요

V40
2015 Late

BLIS

4 결과

BLIS and CTA - symbols and messages

업데이트됨 7/23/2018

In situations where the BLIS (Blind Spot Information System) and CTA functions fail or are interrupted, the combined instrument panel may show a symbol, supplemented by an explanatory message. Follow any recommendation given.

BLIS - operation

업데이트됨 7/23/2018

BLIS (Blind Spot Information System) is a function designed for providing support for the driver when driving in dense traffic on roads with several lanes in the same direction.

CTA*

업데이트됨 7/23/2018

The BLIS function CTA (Cross Traffic Alert) is a driver aid intended to warn about crossing traffic when the car is reversing. CTA is a supplement to BLIS.

BLIS

업데이트됨 7/23/2018

BLIS (Blind Spot Information System) is a function designed for providing support for the driver when driving in dense traffic on roads with several lanes in the same direction.

BLIS is a driver's aid intended to provide a warning about:

  • vehicles in the car's blind spot
  • quickly approaching vehicles in the left and right lanes closest to the car.

경고

BLIS is a supplementary aid and does not work in all situations.

BLIS is no substitute for a safe driving style and the use of rearview and door mirrors.

BLIS can never replace the driver's responsibility and attention - it is always the driver's responsibility to change lanes in a safe manner.

Overview

Position of the BLIS lampNOTE: The illustration is schematic - details may vary depending on car model..

Position of the BLIS lamp

NOTE: The illustration is schematic - details may vary depending on car model.

.

Indicator lamp
BLIS symbol

참고

The lamp illuminates on the side of the car where the system has detected the vehicle. If the car is overtaken on both sides at the same time then both lamps illuminate.

Maintenance

The sensors for the BLIS functions are located inside the rear wing/bumper on each corner of the car.

Keep this surface clean - also on the left-hand side.

Keep this surface clean - also on the left-hand side.

  • To ensure optimal functionality, the areas in front of the sensors must be kept clean.

도움이 되었나요?