매뉴얼을 확인하세요

V40
2015 Late

BLIS

4 결과

BLIS and CTA - symbols and messages

업데이트됨 7/23/2018

In situations where the BLIS (Blind Spot Information System) and CTA functions fail or are interrupted, the combined instrument panel may show a symbol, supplemented by an explanatory message. Follow any recommendation given.

BLIS - operation

업데이트됨 7/23/2018

BLIS (Blind Spot Information System) is a function designed for providing support for the driver when driving in dense traffic on roads with several lanes in the same direction.

Activate/deactivate BLIS

BLIS is activated when the engine is started. This is confirmed by the indicator lamps in the door panels flashing once.

Button for activating/deactivating.

Button for activating/deactivating.

The BLIS function can be deactivated/activated by pressing the BLIS button on the centre console.

Some combinations of the selected equipment leave no vacant space for a button in the centre console - in which case the function is handled by the car's menu system MY CARFor information on the menu system - MY CAR.:

  • Select On or Off at SettingsCar settingsBLIS.

When BLIS is deactivated/activated the lamp in the button goes out/illuminates and the combined instrument panel confirms the change with a text message. The door panel indicator lamps flash once upon activation.

To extinguish the message:

  • Press the left stalk switch OK button.

or

  • Wait approx. 5 seconds – the message extinguishes.

When BLIS operates

Principle for BLIS: 1. Zone in blind spot. 2. Zone for quickly approaching vehicle.

Principle for BLIS: 1. Zone in blind spot. 2. Zone for quickly approaching vehicle.

The BLIS function is active at speeds above approx. 10 km/h.

The system is designed to react when:

  • the vehicle is overtaken by other vehicles
  • another vehicle is quickly approaching the vehicle.

When BLIS detects a vehicle in zone 1 or a quickly approaching vehicle in zone 2, the door panel BLIS lamp illuminates with a constant glow. If the driver activates the direction indicator on the same side as the warning in this situation then the BLIS lamp will change from a constant glow to flashing with a more intense light.

경고

BLIS does not work in sharp bends.

BLIS does not work when the car is being reversed.

Limitations

  • Dirt, ice and snow covering sensors can reduce functionality and make it impossible to provide warnings. BLIS cannot detect hazards if it is covered.
  • Do not affix any objects, tape or labels in the area of the sensors.
  • BLIS is deactivated when a trailer is connected to the car's electrical system.

중요

Repair of the BLIS and CTA functions' components or repainting the bumpers must only be performed by a workshop - an authorised Volvo workshop is recommended.


도움이 되었나요?

CTA*

업데이트됨 7/23/2018

The BLIS function CTA (Cross Traffic Alert) is a driver aid intended to warn about crossing traffic when the car is reversing. CTA is a supplement to BLIS.

BLIS

업데이트됨 7/23/2018

BLIS (Blind Spot Information System) is a function designed for providing support for the driver when driving in dense traffic on roads with several lanes in the same direction.