trip computer

Trip computer - trip statistics*

업데이트됨 7/23/2018

Information is stored about completed trips containing average fuel consumption and average speed, which can be viewed in the centre console's screen as a bar chart.

Function

Trip statisticsThe figure is schematic - layout may vary depending on car model or updated software.

Trip statistics

The figure is schematic - layout may vary depending on car model or updated software.

Each bar symbolises 1 km or 10 km driven distance, depending on the scale selected - the bar at the far right shows the value for the current kilometre or 10 km.

Using the TUNE control, the scale for the bars can be changed between 1 km and 10 km - the cursor on the far right changes position between up and down in relation to the scale selected.

Operation

Different settings can be made in the menu system MY CAR, see MY CAR - there, find Trip statistics.

With the "Reset when vehicle has been off for minimum 4h" option highlighted, all statistics are deleted automatically once driving is complete and the car has been stopped for 4 hours. Trip statistics start again from zero the next time the engine is started.

  • Reset when vehicle has been off for minimum 4h - highlight the box by selecting ENTER and go back out of the menu by selecting EXIT.

If a new driving cycle is started before 4 hours have elapsed then the current period must first be deleted manually using the "Start new trip" option.

  • Start new trip - ENTER is used to delete all previous statistics, go back out of the menu by selecting EXIT.

See also information on Eco guide.


도움이 되었나요?