The following table shows the functions available in each key position/level.
Level | Functions |
0 |
|
I |
Current consumption loads the starter battery in this key position. |
II |
This key position consumes a lot of current from the starter battery and should therefore be avoided! |
Selecting key position/level
- Key position 0 - Unlock the car - This means that the car's electrical system is at level 0.
- Key position I - With the remote control key fully inserted into the ignition switch- Briefly press START/STOP ENGINE.
Not required for cars with the Keyless* function.
참고
To reach level I or IIwithout starting the engine - do not depress the brake/clutch pedal when these key positions are due to be selected.
- Key position II - With the remote control key fully inserted into the ignition switch
Not required for cars with the Keyless* function.
- Give a longpress on START/STOP ENGINE.Approx. 2 seconds.
- Back to key position 0 - To return to key position 0 from position II and I - Briefly press on START/STOP ENGINE.
Audio system
For information on audio system functions with remote control key removed, see the Sensus Infotainment supplement.
Starting and stopping the engine
For information about starting/stopping the engine, see Starting the engine.