Alcolock

Alcolock* - before starting the engine

업데이트됨 7/23/2018

The function of the AlcolockAlso called Alcoguard. is to prevent the car from being driven by individuals under the influence of alcohol.

The Alcolock is activated automatically and is then ready for use when the car is opened.

Nozzle for breath test.
Switch.
Transmission button.
Lamp for battery status.
Lamp for result of breath test.
Lamp indicates ready for breath test.
  1. When the indicator lamp (6) is green the Alcolock is ready for use.
  2. Withdraw the Alcolock from its holder. If the Alcolock is outside the car when it is unlocked then it must first be activated with the switch (2).
  3. Fold up the nozzle (1), take a deep breath and blow with an even pressure until a "click" is heard after approx. 5 seconds. The result will be one of the alternatives in the following table Result after breath test.
  4. If no message is shown then the transmission to the car may have failed - in which case, press the button (3) to transmit the result to the car manually.
  5. Fold down the nozzle and refit the Alcolock in its holder.
  6. Start the engine following an approved breath test within 5 minutes - otherwise it must be repeated.

Result after breath test

Indicator lamp (5) + Display text

Specification

Green lamp + Alcoguard Approved test

Start the engine - no alcohol content measured.

Yellow lamp + Alcoguard Approved test

Engine starting possible - measured alcohol content is above 0.1 promille but below the limit value in forceLimit values vary from country to country. Find out what applies in your country. See also Alcolock.

Red lamp + Disapproved test Wait 1 minute

Engine starting not possible - measured alcohol content is above the limit value in forceLimit values vary from country to country. Find out what applies in your country. See also Alcolock.

참고

After a completed period of driving, the engine can be restarted within 30 minutes without a new breath test.


도움이 되었나요?