Radio

14 결과

Radio station list

업데이트됨 7/23/2018

The radio automatically compiles a radio station list of the strongest radio stations whose signals it is currently receiving. This enables you to find a station when you drive into an area where you do not know the radio stations and their frequencies.

Traffic information (TP)

업데이트됨 7/23/2018

This function allows traffic information that is broadcast within a set radio station's RDS network to break through.

Radio tuning

업데이트됨 7/23/2018

The radio automatically compiles a radio station list of the strongest radio stations whose signals it is currently receiving.

video

Radio

업데이트됨 7/23/2018

It is possible to listen to the AMV60 Plug-in Hybrid and FM radio frequencies, and in certain cases also digital radio (DAB)*.In an Internet-connected car it may be possible to listen to Internet radio, see Apps.

Radio text

업데이트됨 7/23/2018

Some RDS stations transmit information on programme content, artists, etc. This information may be shown on the display screen. Radio text can be shown for FM and DAB* radio.

Digital radio (DAB)*

업데이트됨 7/23/2018

DAB (Digital Audio Broadcasting) is a digital broadcasting system for radio. The car supports DAB, DAB+ and DMB.

Manual radio tuning

업데이트됨 7/23/2018

The radio automatically compiles a radio station list, but it is possible to perform manual radio tuning.

Automatic radio tuning

업데이트됨 7/23/2018

The radio automatically collates a radio station list that the automatic radio tuning uses.

Volume control for interrupting RDS-functions

업데이트됨 7/23/2018

The interrupting RDS-functions, e.g. alarm or traffic information (TP), are heard at the volume selected for each respective programme type. If the volume level is adjusted during the programme interruption, the new level is saved until the next programme interruption.

RDS functions

업데이트됨 7/23/2018

With RDS the radio can automatically change to the strongest transmitter. RDS provides the facility to receive e.g. traffic information (TP) and to search for certain programme types (PTY).

Alarms in the event of accidents and disasters

업데이트됨 7/23/2018

The radio function is used to warn of serious accidents and catastrophes. The message ALARM! appears on the display screen when an alarm message is transmitted. The alarm can be temporarily interrupted, but not deactivated.

Remote control*

업데이트됨 7/23/2018

The remote control can be used for all functions in the audio and media system. The remote control's buttons have the same functions as the buttons in the centre console or steering wheel keypad.

Automatic radio frequency update (AF)

업데이트됨 7/23/2018

The function automatically selects the strongest transmitter for the set radio station and can be activated for FM radio.

Radio stations as presets

업데이트됨 7/23/2018

Frequently used radio stations are optimally saved as presets in order to facilitate simple activation.

Station presets.

Station presets.

AM

Does not apply to V60 Plug-in Hybrid.

/FM radio

10 presets can be stored per wavelength (e.g. AM).

The stored presets are selected using the preset buttons.

Tune into a station, see Radio tuning.

Hold one of the preset buttons depressed for a few seconds. The preset button can now be used.

A list of pre-selected channels can be shown in the display screen.

To activate/deactivate, in the normal view for the AM/FM source, press OK/MENU and select ShowPresets.

Digital radio (DAB)*

10 presets can be stored per wavelength. Storage of presets is performed by means of a long press on the desired preset button, for more information see AM/FM radio above. The stored presets are selected using the preset buttons.

A preset contains one channel but no subchannels. If a subchannel is being played and a preset is saved then only the main channel is registered. This is because subchannels are temporary. At the next attempt to retrieve the preset, the channel which contained the subchannel will be played. The preset is not dependent on the channel list.

A list of pre-selected channels can be shown in the display screen.

To activate/deactivate, in the normal view for the DAB source, press OK/MENU and select ShowPresets.

참고

The audio system's DAB system does not support all functions in the DAB standard.


도움이 되었나요?