Controls

Common operations during map navigation

업데이트됨 7/23/2018

Some common operations during map navigation are described below.

  • Where am I?
  • Find the car symbol on the map
  • Driving direction or north up on the map
  • 2D or 3D display
  • Zoom
  • Scroll
  • Switching heading display
  • Return from a menu

Where am I?

What geographic position does the car have now?

  • Press the map's car symbol (blue triangle) - the information is shown directly on the map.

Find the car symbol on the map

P5-1507-Nav-Hitta bilen

Press the crosshairs symbol.

After zooming in and out and scrolling around on the map it can sometimes be hard to find your way back to the car's position on the map. This is the simplest way to find it:

  • Press the crosshairs symbol - the map is then reset and thereafter follows the car symbol.

Driving direction or north up on the map

P5-1507-Nav-Norr eller Körriktn UPPÅT

Press the compass to change the car symbol’s movement on the map.

The driver can choose between two ways to represent the car's movement in relation to the map:

  • The map is always shown with north upwards on the centre display - the car symbol moves in its true compass direction on the map. If the car symbol moves to the left on the map then the car is driving westwards.
  • The car symbol always points upwards on the centre display - the map rotates under the car symbol depending on how the car turns. The compass symbol indicates the direction of north (N) on the map, and the centre of the compass shows the direction in which the front of the car is pointing (in this case NE = Northeast).

Compass symbols

Compass direction

N

(North): North

NE

(NorthEast): Northeast

E

(East): East

SE

(SouthEast): Southeast

S

(South): South

SW

(SouthWest):Southwest

W

(West): West

NW

(NorthWest):Northwest

2D or 3D display

P5-1507-Nav-2D eller 3D

Press 2D/3D to change between 2D and 3D display.

In 3D display, the car’s heading is always upwards on the centre display - the map rotates around the car symbol depending on how the car turns.

The compass symbol indicates which direction north is (N) on the map, and the centre of the compass shows the direction in which the front of the car is pointing.

The map scale is not shown in the 3D mode.

2D display is described under the previous heading "Driving direction or north up on the map".

Zoom

Zoom in

Make the map bigger like this:

P5-1507-Gestures-Tap

Double-tap the centre display with one finger.

or

P5-1507-Gestures-Spread

Touch the centre display with two fingers close together, then spread them apart.

Zoom out

Make the map smaller like this:

P5-1507-Gestures-Tap with two fingers

Tap once on the centre display with two fingers spread apart.

or

P5-1507-Gestures-Pinch

Touch the centre display with two fingers spread apart, then draw them together.

Scroll

P5-1507-Gestures-Drag

Place one finger on the map, swipe in the desired direction, and release.

The scroll function is only possible with the map in the maximum mode, not when it is minimised.

Switching heading display

P5-1507-Nav-Skifte RUBRIK-visn Pos/Dest

Press here to change the map heading.

Choose between the following displays as the heading on the map:

  • Specification of destination (Destination) and arrival time (ETA) or remaining time to arrival (RTA). To select ETA or RTA, see the section "Route settings".

or

  • Definition of the current position (Position) and distance to the destination (Dist).

Change of heading is only possible with the map in the maximum mode, not when it is minimised.

Finding the way back to the map view

P5-1546-Navi-JPN- Hitta-Hem-knapp + Touch screen
Home button
Menu row Navigation

If the driver is "a long way away" in another part of the system and wishes to quickly return to the map view, this method can be used:

  1. Press the centre display's Home button (1).
  2. If the centre display shows the home view instead of the map view - tap on the uppermost menu row Navigation (2).

도움이 되었나요?