매뉴얼을 확인하세요

XC60
2016 Early

BLIS

4 결과

CTA*

업데이트됨 7/23/2018

The BLIS function CTA (Cross Traffic Alert) is a driver aid intended to warn about crossing traffic when the car is reversing. CTA is a supplement to BLIS.

Activate/deactivate CTA

CTA is activated when the engine is started. This is confirmed by the indicator lamps for BLIS in the door panels flashing once.

On/Off for parking assistance and CTA sensors.

On/Off for parking assistance and CTA sensors.

The CTA function can be deactivated/activated separately with the Parking assistance On/Off button. The BLIS lamps flash once on reactivation.

However, the BLIS function remains activated after the CTA has been deactivated.

경고

CTA is a supplementary aid and does not work in all situations.

CTA is no substitute for a safe driving style and the use of rearview and door mirrors.

CTA can never replace the driver's responsibility and attention - it is always the driver's responsibility to reverse in a safe manner.

When CTA operates

Principle for CTA.

Principle for CTA.

CTA supplements the BLIS function by being able to see crossing traffic from the side during reversing, such as when reversing out of a parking space.

CTA is primarily designed to detect vehicles. In favourable conditions, it may also be able to detect smaller objects, such as cyclists and pedestrians.

CTA is only active during reversing and is activated automatically when the gearbox's reverse position is selected.

  • If CTA detects something approaching from the side, an acoustic warning signal sounds. The signal comes from either the left or the right-hand speaker, depending on the direction from which the object is approaching.
  • CTA also warns by illuminating the BLIS lamps.
  • An additional warning is provided in the form of an illuminated icon in the display screen's PAS graphics.

Limitations

CTA does not perform optimally in all situations, but has a certain limitation - for example, the CTA sensors cannot "see" through other parked vehicles or obstructing objects.

Here are some examples of when CTA's "field of vision" may be limited from the beginning and approaching vehicles cannot therefore be detected until they are very close:

The car is parked deep inside a parking slot.

The car is parked deep inside a parking slot.

Blind CTA sector.
Sector where CTA can detect/"see".
In an angled parking slot CTA can be completely

In an angled parking slot CTA can be completely "blind" on one side.

However, when the driver is slowly reversing the car, the angle is changed in relation to the vehicle/object that is blocking, at which the blind sector rapidly decreases.

Examples of further limitations:

  • Dirt, ice and snow covering sensors can reduce functionality and make it impossible to provide warnings. CTA cannot detect hazards if it is covered.
  • CTA is deactivated when a trailer is connected to the car’s electrical system.

중요

Repair of the BLIS and CTA functions' components or repainting the bumpers must only be performed by a workshop - an authorised Volvo workshop is recommended.

Maintenance

The sensors for the BLIS and CTA functions are located inside the rear wing/bumper on each corner of the car.

Keep this surface clean - also on the left-hand side.

Keep this surface clean - also on the left-hand side.

  • To ensure optimal functionality the areas in front of the sensors must be kept clean.
  • Do not affix any objects, tape or labels in the area of the sensors.

도움이 되었나요?

BLIS - symbols and messages

업데이트됨 7/23/2018

In situations where the BLIS (Blind Spot Information) and CTA (Cross Traffic Alert) functions fail or are interrupted, the combined instrument panel may show a symbol, supplemented by an explanatory message. Follow any recommendation given.

BLIS*

업데이트됨 7/23/2018

BLIS (Blind Spot Information) is a function designed for providing support for the driver when driving in dense traffic on roads with several lanes in the same direction.

BLIS* - operation

업데이트됨 7/23/2018

BLIS (Blind Spot Information) is a function designed for providing support for the driver when driving in dense traffic on roads with several lanes in the same direction.