6 결과

Heated front seats*

업데이트됨 7/23/2018

The front seat heating has three positions for increasing the comfort for driver and passenger when it is cold.

Ventilated front seats*

업데이트됨 7/23/2018

The ventilation can be used at the same time as seat heating. For example, the function can be used to dry damp from clothing.

Seats, front - electrically operated*

업데이트됨 7/23/2018

The car's front seats have different setting options for optimum seating comfort. The power seat can be moved forward/backward and up/down. The front edge of the seat cushion can be raised/lowered. The backrest angle and lumbar support* can be changed.

Power seat

Front edge of seat cushion up/down
Raise/lower seat
Seat, forward/backward
Backrest rake
Lumbar support* is adjusted inward and outward

The power seats have overload protection which is tripped if a seat is blocked by an object. If this should happen, set the car's electrical system in key position I or 0 and wait a short time before adjusting the seat again.

Only one movement (forward/back/up/down/inward/outward) can be made at a time.


The seat can be adjusted for a certain time after unlocking the door with the remote control key without the key in the ignition switch. Seat adjustment is normally made in key position I and can always be made when the engine is running.

Seat with memory function*

The memory function stores settings for the seat and the door mirrors.

Store setting

Memory button
Memory button
Memory button
Button for storing settings

Adjust the seat and the door mirrors.

Press and hold button M while pressing button 1, 2 or 3 simultaneously. Hold the buttons depressed until the acoustic signal is heard and text is shown in the combined instrument panel.

The seat must be adjusted again before a new memory can be set.

The setting for lumbar support is not stored.

Using a stored setting

Press one of the memory buttons 1-3 until the seat and the door mirrors stop. If the button is released, the movement of the seat and door mirrors will be interrupted.

Key memory* in remote control key

All remote control keys can be used by different drivers to store the settings for the driver's seat and door mirrorsOnly if the car is equipped with power seat with memory and retractable power rearview and door mirrors. The setting for lumbar support is not stored., see Remote control key - personalisation.

Emergency stop

If the seat accidentally begins to move, press one of the setting buttons for the seat or memory buttons in order to stop the seat.

Restarting to reach the seat position stored in the key memory is performed by pressing the unlock button on the remote control key. The driver's door must then be open.


Risk of crushing! Make sure that children do not play with the controls. Check that there are no objects in front of, behind or under the seat during adjustment. Make sure that none of the passengers in the rear seat is in danger of becoming trapped.

Heated/ventilated seats*

For heated seats/ventilated, see Heated front seats and Heated rear seat.

도움이 되었나요?

Heated rear seat*

업데이트됨 7/23/2018

The heating for the rear seat'sintegrated two-stage booster seat outer positions has three positions for increasing the comfort for passengers when it is cold.

Seats, front

업데이트됨 7/23/2018

The car's front seats have different setting options for optimum seating comfort.


Seats, rear

업데이트됨 7/23/2018

The rear seat backrest and the outer seat head restraints can be folded. The centre seat head restraint can be adjusted to suit the height of the passenger.