Manual charging cable release for non-responsive key (hybrid cars)

Updated 9/29/2022

 Note

When the door is open after being unlocked using the key blade, the alarm is triggered.
  1. Px-22w23-Latest info-Emeregency open door handle
    Pull out the front door handle on the left-hand side to its end position so that the lock cylinder becomes visible.
  2. Insert the key blade in the lock cylinder.
  3. Turn clockwise 45 degrees so that the key blade is pointing straight back.
  4. Turn the key blade back 45 degrees to its starting position. Remove the key blade from the lock cylinder and release the handle so that the rear section of the handle is resting against the car again.
  5. Open the door.
    Now the alarm is triggered, proceed with the next step to deactivate it.
  6. P5-22w23-Latest information-Key compartment
    Place the remote-control key on the symbol in the storage compartment.
  7. P5-22w23-Latest information-Engine start button
    Turn the start knob as shownIt is important that you do not press the brake pedal at this point.
  8. Px-22w23-Latest information-Central lock button
    Press the central lock button as shown.
    Now you can unplug the charging cable. If you are not, please repeat the procedure from step 6 to step 8.

Did this help?