New procedures for replacing the rear wiper blade

New procedures for replacing the rear wiper blade

If your car has been in for service and a service technician has replaced the wiper arm for the rear wiper blade, the procedure for replacing the wiper is different.

Replacing the rear wiper blade

If the wiper arm has been replaced by a service technician in connection with service, follow the steps below to replace the wiper blade on the rear windowApplies to the V60, V60CC and V60H manufactured before 15w26 where the wiper arm is replaced in connection with service..

16w26 - Support site - P3/P4 - Back Windshield Wiper

Press with a thumb at the arrow to loosen the blade.

Fold the wiper arm outwards.

Angle the wiper blade slightly out from the wiper arm.

Grip around the wiper arm and using a thumb, press the blade forward (at the arrow) to loosen and remove the blade.

Press the new wiper blade into place. Check that it is firmly attached.

Fold the wiper arm back down.

Car model/model year

V60, V60 Cross Country, V60H manufactured before 15w26 where the wiper arm is replaced in connection with service

This article is applicable to

Car model/model year

V60, V60 Cross Country, V60H manufactured before 15w26 where the wiper arm is replaced in connection with service

Listed under topics

Use your car Maintenance & Service

Help us by rating this article

Thank you for your feedback.

DCS Thanks Description