Bulb replacement
The bulb in the halogen headlamp, reversing lamp and rear fog lamp can be replaced by the driver.
The bulb in the halogen headlamp can be replaced without the help of a workshop, but the plastic cover over the headlamp must be removed before a bulb can be replaced.
Note
Points to remember when the cover is refitted:
- The pin in the clip needs to be pressed back fully before the clip is refitted in the cover.
- When the cover is refitted, the pin must be pressed in until the end surface is level with the surface of the clip.
The reversing lamp bulb and the rear fog lamp bulb can be replaced without assistance from a workshop.
Contact a workshop1 if there is a fault in bulbs other than the bulbs in the halogen headlamps, the reversing lamp bulb or the rear fog lamp bulb. If a fault occurs in LED2 lamps, the entire lamp unit usually must be replaced.