TV functions, control overview.
For basic information on playback and navigation, read how the system is operated and menu navigation . See below for a more detailed description.
It is possible to link certain functions to the FAV button. A linked function is then activated simply by pressing the FAV button, see Favourites.
This system only supports TV broadcasts in the countries that broadcast in MPEG-2 or MPEG-4 format and follow the DVB-T standard. The system does not support analogue broadcasts.
The TV picture is only shown when the car is stationary. The picture disappears when the car is moving at a speed above approx. 6 km/h, although the audio is heard during this time. The picture reappears when the car has stopped.
The reception is dependent both on how good the signal strength and signal quality are. The transmission may be disturbed by various factors such as tall buildings or the TV transmitter being far away. Coverage level can also vary depending on where in the country you are located.
A TV licence is required for this product in some countries.
In the normal view for the media source, press MEDIA, turn TUNE to TV and then press OK/MENU.
A search starts and after a short while the most recently used channel is shown.
It is possible to change channel as follows:
- Turn TUNE, a list of all available channels in the area is shown. If any of these channels is already saved as a preset then its preset number is shown to the right of the channel name. Turn TUNE to the required channel and press OK/MENU.
- By pressing the preset buttons (0-9).
- Via a short press on the / buttons the next available channel in the area is shown.
If no reception is available when a channel is selected from the preset buttons, it may be because the car is in a different location than when the last channel search was performed and the channel list was stored.