Cruise control

Cruise control* temporary deactivation and standby mode

Updated 7/23/2018

The cruise control (CC – Cruise Control) helps the driver to maintain an even speed.

The function can be temporarily deactivated and set in standby mode.

Temporary deactivation - standby mode

The steering wheel buttons and display in cars without speed limiter A Volvo dealer has updated information about what applies in each respective market..

The steering wheel buttons and display in cars without speed limiter

A Volvo dealer has updated information about what applies in each respective market.

.

The steering wheel buttons and display in cars with speed limiter.

The steering wheel buttons and display in cars with speed limiter

A Volvo dealer has updated information about what applies in each respective market.

.

To temporarily disengage cruise control and set it in standby mode:

  • Press .
> The combined instrument panel's marking (5) and symbol (6) change colour from WHITE to GREY - Cruise control is temporarily disengaged.

Standby mode due to driver intervention

Cruise control is temporarily disengaged and set automatically in standby mode if:

  • the foot brake is used
  • the clutch pedal is depressed for longer than 1 minute

    Disengaging and selecting a higher or lower gear does not involve standby mode.

  • the gear lever/selector is moved to N position
  • the driver maintains speed higher than the stored speed for longer than 1 minute.

The driver must then regulate the speed.

A temporary increase in speed with the accelerator pedal, e.g. during overtaking, does not affect the setting - the car returns to the last stored speed when the accelerator pedal is released.

Automatic standby mode

Cruise control is temporarily disengaged and set in standby mode if:

  • wheels lose traction
  • engine speed is too low/high
  • speed falls below 30 km/h (20 mph).

The driver must then regulate the speed.


Did this help?