V60 Cross Country

2016 Late

Cruise control

Cruise control* temporary deactivation and standby mode

Updated 7/23/2018

The cruise control (CC – Cruise Control) helps the driver to maintain an even speed.

The function can be temporarily deactivated and set in standby mode.

The steering wheel buttons and combined instrument panel in cars without speed limiterA Volvo dealer has updated information about what applies in each respective market..

The steering wheel buttons and combined instrument panel in cars without speed limiter

A Volvo dealer has updated information about what applies in each respective market.

.

The steering wheel buttons and combined instrument panel in cars with speed limiter.

The steering wheel buttons and combined instrument panel in cars with speed limiter

A Volvo dealer has updated information about what applies in each respective market.

.

Cruise control - On/Off.
Standby mode ceases and the stored speed is resumed.
Standby mode
Activate and adjust the speed.
Selected speed (GREY = Standby mode).
Cruise control active - WHITE symbol (GREY = Standby mode).

Temporary deactivation - standby mode

          

To temporarily disengage cruise control and set it in standby mode:

  • Press the steering wheel button .
> The combined instrument panel's marking (5) and symbol (6) change colour from WHITE to GREY - cruise control is temporarily disengaged.

Standby mode due to driver intervention

          

Cruise control is temporarily disengaged and automatically set in standby mode if:

  • the foot brake is used
  • the clutch pedal is depressed for longer than 1 minute

    Disengaging and selecting a higher or lower gear does not involve standby mode.

  • the gear lever/selector is moved to N position
  • the driver maintains speed higher than the stored speed for longer than 1 minute.

The driver must then regulate the speed.

A temporary increase in speed with the accelerator pedal, e.g. during overtaking, does not affect the setting - the car returns to the last stored speed when the accelerator pedal is released.

Automatic standby mode

          

Cruise control is temporarily disengaged and set in standby mode if:

  • wheels lose traction
  • engine speed is too low/high
  • speed falls below 30 km/h (20 mph).

The driver must then regulate the speed.


Did this help?