Cargo area

Safety net*

Updated 7/23/2018

A safety net prevents loads from being thrown forward in the passenger compartment in the event of sudden braking.

Attaching

P3-1617-V60-load net overview

For safety reasons, the safety net must always be correctly fastened and secured.

The net is made of a strong nylon fabric and can be secured two different locations in the car:

  • Rear fitting - Behind the rear seat backrest
  • Front fitting - Behind the front seat backrests.

Warning

Loads in the luggage compartment must be anchored well, and also using a correctly fitted safety net.

Rear fitting

Fold out the safety net. Make sure that the safety net's storage pockets are turned backwards.

Hook one of the net's retaining hooks into the rear roof mounting.

Hook the net's other retaining hook into the roof mounting on the opposite side.

Take care to press forward the net's retaining hooks for each respective roof mounting's front end position.

P3-1617-V60 load net rear position

Hook the hook into the load retaining eyelets on both sides and tension the cam lock by pressing down the tongue and tensioning the strap.

Front fitting

Fold out the safety net. Make sure that the safety net's storage pockets are turned backwards.

Place the seats as far forward as possible.

Hook one of the net's retaining hooks into the front roof mounting.

Hook the net's other retaining hook into the roof mounting on the opposite side.

Take care to press forward the net's retaining hooks for each respective roof mounting's front end position.

P3-1617-V60- load net front position

Hook the hook into the eyelet on the seat rail on both sides and tension the cam lock by pressing down the tongue and tensioning the strap.


Did this help?