V60 Twin Engine

2020 Early

Cruise control functions

Use Overtaking Assistance

Updated 1/21/2020

Use Overtaking Assistance

Overtaking assistance can be used with adaptive cruise control* or Pilot Assist*. There are a number of criteria if Overtaking Assistance is to be used.

The following conditions must exist for Overtaking Assistance to be activated:

  • there must be a vehicle in front (the “target vehicle”)
  • your car's current speed is at least 70 km/h (43 mph)
  • the stored speed must be high enough for overtaking to take place safely.

To start the Overtaking Assistance:

Activate the direction indicator.

Use the left-hand direction indicator in a left-hand drive car right in a right-hand drive car.

Overtaking Assistance is started.

Warning

When using the Overtaking Assistance System, the driver should be aware that there may be undesired acceleration if the conditions suddenly change.

Some situations should therefore be avoided, such as if:

  • the car is approaching an exit for turn-of that is in the same direction as overtaking would normally occur.
  • the vehicle ahead slows down before the driver's car has crossed over into the overtaking lane.
  • the traffic in the overtaking lane slows down.
  • a right-hand drive car is driven in a county with left-hand traffic (or vice versa).

Situations of this type are avoided by temporarily setting adaptive cruise control or Pilot Assist to standby mode.


Did this help?