V60 Twin Engine

2020 Early

Explore your manual

V60 Twin Engine
2020 Early

8 Results

Hold and Charge function

Updated 1/21/2020

In some situations, it can be useful to be able to control the hybrid battery's state of charge while driving is in progress. This is possible with the functions Hold and Charge.

Drive modes

Updated 1/21/2020

Selection of drive mode affects the car's driving characteristics in order to enhance the driving experience and facilitate driving in special situations.

Changing drive mode*

Updated 1/21/2020

Select the drive mode adapted for the current driving conditions.Change the drive mode using the control in the centre console.

Energy distribution in hybrid drive using map data*

Updated 1/21/2020

The Hybrid drive mode is the car's normal mode where the electric motor and internal combustion engine work individually or together in hybrid drive. If a destination has been selected in the navigation system, the Predictive Efficiency function distributes the electric energy consumption in an intelligent way along the whole driving distance using the map data.

Level control* and shock absorption

Updated 1/21/2020

Level control and shock absorption are regulated automatically in the car.

Adjusting the setting for damping Polestar Engineered*

Updated 1/21/2020

It is possible to adjust the settings of the shock absorbers for driving under other conditions or on specific road surfaces.

Driving with electric operation

Updated 1/21/2020

When driving on electric power, Volvo Twin Engine provides a combination of good fuel economy, low emissions and high performance.

All-wheel drive*

Updated 1/21/2020

All-wheel drive (AWD) means that the car is driving all four wheels at the same time, which improves traction.