Examples of limitations:
- Dirt, ice and snow covering the sensors may reduce the functions and deactivate alerts.
- BLIS is deactivated when a trailer is connected to the car’s electrical system.
The sensors for the BLIS function are located inside each corner of the rear wing/bumper. The sensors are also used by the Cross Traffic Alert (CTA) function.
Keep the surface clean - on both the left and right-hand sides of the car
NOTE: The illustration is schematic - details may vary depending on car model.
To ensure optimal functionality, the surfaces in front of the sensors must be kept clean.
Do not affix any objects, tape or labels in the area of the sensors.
Repair of the BLIS and CTA functions' components or repainting the bumpers must only be performed by a workshop - an authorised Volvo workshop is recommended.