Show trip statistics in the centre display

Trip statistics from the trip computer are displayed graphically in the centre display and provide an overview that facilitates more fuel-efficient driving.
P5-1507-icon app screen driver performance

Open the Driver performance app in app view in order to show the trip statistics.

Each bar in the diagram symbolises a distance of 1, 10 or 100 km, alternatively miles. The bars are filled in from the right as driving progresses. The bar on the far right shows the value for the current distance.

The average fuel consumption and total driving time are calculated since the last time the trip statistics were reset.

Fuel and electricity consumption are shown in separate graphs. Electricity consumption is "net" consumption, i.e. energy consumed minus regenerated energy created during braking.

P5-1519-XC90 Hybrid trip statistics
Trip statistics from the trip computer1.

 Note

When driving with electric operation, fuel consumption can be indicated in the trip statistics if the additional heater2 is running.

Settings for trip statistics

Press Preferences to

  • change graph scale. Select resolution 1, 10 or 100 km/miles for the bar.
  • reset data after every trip. Performed when the car has been stationary for more than 4 hours.
  • reset data for the current trip.

Trip statistics, calculated average consumption and total driving time are always reset simultaneously.

Change unit

Change the unit for mileage, fuel consumption, etc. via the centre display as follows:

Press Settings in the top view.
Press SystemUnits.
Under Units, select the required unit standard: Metric, Imperial or US.
  1. 1 The figure is schematic, the layout may vary depending on selected unit standard or updated software.
  2. 2 Applicable to fuel-driven auxiliary heater.