Importing/exporting a driver profile from/to USB

The personal settings saved in the driver profiles can be exported/imported to other cars via USB.
Follow these steps in order to import/export a driver profile from/to a USB memory:
Press Settings in the top view in the centre display.
Press SystemDriver Profile.
P5–1617–AUX USB connectors
USB socket in tunnel console.
Insert a USB memory in the tunnel console.
Select Import Profile From USB/Export Profile To USB.

 Note

Only one USB memory can remain inserted in the port while profiles are being imported and exported. If there is more than one then there is the risk that the profile is saved to the wrong USB memory or that the car cannot find a profile to import.

 Note

A number of profiles can be exported to a USB memory, but only one profile can be imported at a time. When a profile is imported it overwrites the car’s current profile. The profile name is also written over.

The guest profile cannot be exported or imported.

Select the profile to be imported or the profile(s) to be exported.
The current driver profile is overwritten when a new one is imported.
Select OK.
If the export fails, it may be due to the following:
  • The USB memory is full.
  • The USB memory is incorrectly inserted or was pulled out during the export.
If the import fails, it may be due to the following:
  • The USB memory is incorrectly inserted or was pulled out during the import.
  • There is no driver profile saved on the USB memory.
  • The file for the driver profile on the USB memory is corrupt.

Related documents