Remote control key

Selecting driver profile

Updated 7/23/2018

The last used driver profile is the one selected when the car is unlocked. It is possible to change to another driver profile after the car has been unlocked.

When the centre display has been started, the selected driver profile is shown at the top of the screen. The driver profile last used is the one that will be active next time the car is unlocked. However, if the remote control key has been linked to a driver profile then this is what is selected when the car is started. See "Linking remote control key to driver profile".

There are two options for changing to another driver profile.

Option 1:

Tap on the name of the driver profile shown in the top of the centre display when the display has been started.

A list of selectable driver profiles is shown.

Select the driver profile required.

Press Confirm.

The driver profile is selected and the system loads the settings for the new driver profile.

Option 2:

Drag down the top view in the centre display.

Press Profile.

The same list as for Option 1 is shown.

Select the driver profile required.

Press Confirm.

The driver profile is selected and the system loads the settings for the new driver profile.


Did this help?