Calibration of the tyre pressure monitoring system (TM)
Calibration is necessary after a tyre change or a change in tyre pressure.
If this symbol illuminates then you need to calibrate the tyre pressure monitoring system.
Calibration is always necessary after a tyre change or a change in tyre pressure. If the lamp illuminatesthen the system needs to be calibrated. Proceed as follows:
With the ignition switched off, inflate all tyres and check the tyre pressure. For more information about tyre pressure, see the tyre pressure label on the driver's side door pillar.
Start the car. Open the menu system My Car and select Tyre pressure.
Select Calibrate tyre pressure and press "OK".
Drive the car for at least 10 minutes no slower than 30 km/h (20 mph). Recalibration takes place while the car is being driven.
The view for where you start calibration.
Remember that the system must be calibrated after each tyre change or if the tyre pressure is adjusted.
Car model/model year
Car models of model year 2015 onwardsDoes not apply to the V60 Plug In-Hybrid, V60 Twin Engine, S60 Polestar (350 hp) or V60 Polestar (350 hp).