City Safety brakes for oncoming vehicles

City Safety can assist the driver to use emergency braking for an oncoming vehicle in your car's lane.

If an oncoming vehicle enters your car's lane and a collision is unavoidable, City Safety can reduce the car's speed with a view to reducing the violence of the impact.

P5+6-1817 CitySafety bromsar för mötande
P5-Icon red circle 1Your car
P5-Icon red circle 2Oncoming vehicles
For this function to work, the following criteria must be met:
  • your car must be travelling at more than 4 km/h (3 mph)
  • the road section must be straight
  • your car's lane must have clear lane markings
  • your car must be positioned straight in its own lane
  • the oncoming vehicle must be within your car's lane markings
  • the oncoming vehicle must have its headlamps switched on
  • this function can only handle "front to front" collisions
  • this function can only detect vehicles with four wheels.


This function uses the car's camera and radar units, which have certain general limitations.


Driver supports only warn of obstacles which their radar unit has detected – hence a warning may not be given, or it may be given with a certain delay.
  • Never wait for a warning or intervention. Apply the brakes when the situation requires.


  • The function is supplementary driver support intended to facilitate driving and make it safer – it cannot handle all situations in all traffic, weather and road conditions.
  • The driver is advised to read all sections in the Owner's Manual that relate to this function to learn about factors such as its limitations and what the driver should be aware of before using the system.
  • Driver support functions are not a substitute for the driver's attention and judgement. The driver is always responsible for ensuring the car is driven in a safe manner, at the appropriate speed, with an appropriate distance to other vehicles, and in accordance with current traffic rules and regulations.