Settings
To change the settings for the parking camera:
- Press OK/MENU when a camera view is shown.
- Turn to reach the desired option with OK/MENU.
- Press OK/MENU and back out with EXIT.
or
- Press CAM.
- Press OK/MENU.
- Turn to reach the desired option with OK/MENU.
- Press OK/MENU and back out with EXIT.
Miscellaneous
The default setting is that the camera is activated when reverse gear is engaged.
- One press on CAM activates the camera even if reverse gear is not engaged.
- Change between normal and zoomed image by turning TUNE or by pressing CAM.
Towbar
The camera can be used to advantage when hitching a trailer. A park assist line for the towbar's intended "trajectory" toward the trailer can be shown on the screen - just as for the "wheel tracks".
- If precise manoeuvring is required then the towbar can be zoomed in by pressing CAM - pressing the button again returns to normal view.
The towbar's park assist line is activated in the menu system after pressing OK/MENU where you can select to display either the "wheel tracks" or the towbar's trajectory - both options cannot be shown simultaneously.