Store two different positions for the power* seat, the door mirrors and the head-up display* using the memory buttons. The buttons are located on the inside of one of the front doors or both*.
Storing a position
Adjust seat, door mirrors and head-up display to the desired position.
Press and hold the M button depressed. The light indicator in the button illuminates.
Within three seconds, press and hold the 1 or 2 button.
When the position has been stored in the selected memory button, an acoustic signal can be heard and the light indicator in the M button extinguishes.
If none of the memory buttons is depressed within three seconds then the M button extinguishes and no storing takes place.
The seat, the door mirrors or the head-up-display must be readjusted before a new memory can be set.
All driver profiles need to be set in Protect Profile mode in order for the stored positions to work.