XC60 Recharge Plug-in Hybrid

2021 Late

Charging the hybrid battery

Charging status in the charging cable's control unit

Updated 11/9/2020

Charging status in the charging cable's control unit

The indicator on the charging cable's control unit shows the status of ongoing charging as well as status after completed charging.

P5P6-2017-Control module hybrid cable

Control unit LEDLED (Light Emitting Diode) lamp.

LED lamp

LED

Status

Specification

Recommended action

Extinguished

Charging is not possible.

No power supply to charging cable.

  1. Unplug the charging cable from the socket.
  2. Plug the charging cable into the socket again or use another socket.
  3. If the problem persists – contact Volvo Support.

White light

Charging possible.

The charging cable is ready to be plugged into the car.

If the LED lamp is white but charging is not possible:

  1. Unplug the charging cable from the charging input socket.
  2. Plug the charging cable into the charging input socket again.
  3. If the indicator does not flash white within approx. 10 seconds – first unplug the charging cable from the charging input socket and then from the power socket. Plug the charging cable into the charging input socket and the socket again.
  4. If the problem persists – contact Volvo Support.

Flashes white

Charging in progress.

The car's electronics have started charging

Charging in progress.

Wait until the batteries are fully charged.

Illuminates in red

Charging is not possible.

Temporary fault.

  1. Unplug the charging cable from the charging input socket.
  2. Wait for a short time.
  3. Plug the charging cable into the charging input socket again.
  4. If the problem persists – contact Volvo Support.

Flashes red

Charging is not possible.

Critical fault.

First remove the charging cable from the charging input socket and then from the power outlet. If the problem persists – contact Volvo Support.


Did this help?