XC90 Recharge Plug-in Hybrid

2021 Early

Adaptive cruise control

Selecting and activating adaptive cruise control*

This function can be either standard or optional, depending on market.

Updated 5/18/2020

Selecting and activating adaptive cruise control*

This function can be either standard or optional, depending on market.

Adaptive cruise control (ACCAdaptive Cruise Control) must first be selected and then activated to enable it to control speed and distance.

P5-1507-Adaptive Cruise Control, setting cruise control in standby mode

To start the function requires the following:

  • The driver's seatbelt must be buckled and the driver's door must be closed.
  • There must be a vehicle (the "target vehicle") within reasonable distance in front of the car, or the current speed must be at least 15 km/h (9 mph).
  • For cars with manual gearbox. Speed must be at the lowest 30 km/h (20 mph).

Press the steering wheel button (2) or (3) to scroll to the adaptive cruise control symbol (4).

The symbol is grey – the adaptive cruise control is in standby mode.

When speed limiter is selected – press the steering wheel button (1) to activate.

The symbol is white – the speed limiter is started and the current speed is stored as maximum speed.

Reactivating adaptive cruise control to the last stored speed

When the adaptive cruise control is selected – press the steering wheel button to activate.

The cruise control markings and symbols in the driver display change colour from GREY to WHITE — the car will now follow the most recently stored speed again.

Warning

A significant increase in speed may follow when the speed is resumed with the steering wheel button.


Did this help?