Activating and starting the Cruise control

Cruise control function (Cruise Control - CC) must first be selected and activated in order to be able to regulate the speed.
P5-1507-CC rattknappar-2
Buttons and symbols for functions.

Active Cruise Control

Press ◀ (1) or ▶ (3) to browse to the symbol/function P5-1507-Symbol_acc (4).
The symbol is shown and the cruise control can then be activated.

Start Cruise Control

In order to start the cruise control from standby mode, the car's current speed must be 30 km/h (20 mph) or higher. The lowest speed that can be stored is 30 km/h (20 mph).

With the symbol/function P5-1507-Symbol_acc displayed, press the steering wheel button P5-1507-Symbol 5x3,5-CC rattknapp Centrum-V (2).
Cruise Control starts and the current speed becomes the stored speed.

 Note

Cruise Control cannot be enabled at speeds below 30 km/h (20 mph).

 Note

When speed exceeds 120 km/h (75 mph) the driver is alerted of this with 3 "plings".