Lamp replacement - headlamps
Removing the headlamp
Set the car's electrical system in key position 0, see Key positions - functions at different levels.
|Pull out the headlamp's locking pins.|
|Release the headlamp by alternately tilting and pulling it out.|
|Detach the headlamp connector by pressing down the clip with your thumb.|
|At the same time, guide out the connector with your other hand.|
|5.||Lift out the headlamp and place it on a soft surface to avoid scratching the lens.|
|6.||Replace the bulb in question.|
Securing the headlamp
Reinstall the headlamp and locking pins. The short pin is fitted closest to the grille. Check that they are firmly inserted.
The headlamp must be mounted and the connector firmly connected before the lighting is switched on or the remote control key is inserted into the ignition switch.