Replacing daytime running light bulb/position lamp bulb, front
The bulb for the daytime running light/position lamp in halogen headlamps can be replaced by the driver.
Before the bulb can be replaced, the plastic cover over the headlamp must be removed; see the section "Bulb replacement".
- Detach the headlamp's rubber cover for the daytime running light bulb/position lamp bulb.
- The bulb for the daytime running light/position lamp is easier to access if the main beam bulb is detached. The main beam bulb is fitted diagonally above the daytime running light bulb/position lamp bulb. Detach the main beam bulb by rotating its bulb holder upwards and then pulling straight out.
Note
Pull the bulb holder for the daytime running light bulb/position lamp bulb straight out. - Detach the bulb by pulling it straight out.
- Replace the bulb.
- Fit the bulb holder into the socket and press it into place.
- If the main beam bulb's bulb holder has been removed, fit it into the socket and screw in.
- Refit the headlamp's rubber cover.