Volvo On Call* app
Certain functions are not available on all car models.
The app is continuously updated which may mean that this information does not reflect available functionality. For more information on Volvo On Call see support.volvocars.com.
The app is available for iOS, Android and Windows Mobile. Download from Apple's AppStore, Windows Phone Store or Google Play.
A personal Volvo ID is required to use the app and online services from Volvo.
Read more about Volvo ID and its advantages and how to create a .
Locating the car
The position of the car is shown on a map and there is the option to receive directions to the car. There is also a digital compass that points the driver in the right direction. It is possible to activate the car's horn and direction indicators in order to facilitate the search.
Send destination to car
With the app, the "Send to Car" function can be used to send a destination (such as hotels, shops, cinemas, restaurants and petrol stations) to the car. Destination position is then available in the car's navigation system1. If the car's navigation system is not factory installed, the car's configuration needs to be updated by a Volvo dealer so that the Volvo On Call app knows that it can send a destination to the car. For instructions for the Send to Car function, see support.volvocars.com.
The car's instrument panel
This function provides the driver with access to a range of information: fuel level, remaining mileage with existing fuel quantity, average fuel consumption, average speed, and readings from the odometer and trip meter.
Checking the car
The app carries out a "health check" of the car and shows information on bulbs, brake fluid, coolant and oil level.
Detailed information on each journey during the last 40 days can be downloaded and saved. There is also the option to export all or selected journeys from the app in spreadsheet format and send this to an email address. This is suitable for travel on official business, for example.
There is the option to deactivate the driving journal. In which case the car does not send any log information after each completed journey.
Basic data about the car such as model, registration number and VIN number are easily accessible.
If the car alarm is activated the driver is advised of this via his/her device.
Remote locking of doors
Status for all doors and windows is shown. The driver can lock and unlock the car. For security reasons the password for the app is always required to remotely unlock the car. Your personal Volvo ID is used as password.
Remote heater start
If the car is equipped with a parking heater then it can be started immediately or programmed to start at two different time points.
Engine remote start2
The air conditioning starts with automatic settings. A remote-started engine is activated for a maximum of 15 minutes, then it is switched off. After 2 activations of remote start the engine must be started in the normal way before remote start can be used again.
Engine remote start is only available in cars with automatic gearbox and cars that have a bonnet switch3 installed.
To remote-start the engine, the following criteria must be met:
- The car must be supervised.
- There must be no people or animals inside or around the car.
- The car must not be parked in a closed, unventilated area - the exhaust gases may seriously injure humans and animals.
Battery and state of charge4
See how much charge the hybrid battery has and whether charging is in progress.
Set charging for specific times4
Charging does not need to be started immediately when the charging cable is connected. It is possible to use the app to set the time when charging can take place.
Reminder to plug in the charging cable4
Option to activate a reminder in the app to plug in the charging cable if it has been forgotten after parking the car.
Preconditioning prepares the car's drive systems and the passenger compartment before departure so that both wear and energy needs during the journey are reduced. The app is used in the same way as for remote heater start.