Seats, front - electrically operated*

The car's front seats have different setting options for optimum seating comfort. The power seat can be moved forward/backward and up/down. The front edge of the seat cushion can be raised/lowered. The backrest angle and lumbar support* can be changed.

Power seat

P3-1420-Elmanövrerat säte
  1. Ikon röd cirkel 1Front edge of seat cushion up/down
  2. Ikon röd cirkel 2Raise/lower seat
  3. Ikon röd cirkel 3Seat, forward/backward
  4. Ikon röd cirkel 4Backrest rake
  5. Ikon röd cirkel 5Lumbar support* is adjusted inward and outward

The power seats have overload protection which is tripped if a seat is blocked by an object. If this should happen, set the car's electrical system in key position I or 0 and wait a short time before adjusting the seat again.

Only one movement (forward/back/up/down/inward/outward) can be made at a time.


The seat can be adjusted for a certain time after unlocking the door with the remote control key without the key in the ignition switch. Seat adjustment is normally made in key position I and can always be made when the engine is running.

Seat with memory function*

P3-1420-Säte med minnesfunktion

The memory function stores settings for the seat and the door mirrors.

Store setting

Ikon röd cirkel 1Memory button
Ikon röd cirkel 2Memory button
Ikon röd cirkel 3Memory button
Ikon röd cirkel 4Button for storing settings
Adjust the seat and the door mirrors.
Press and hold button M while pressing button 1, 2 or 3 simultaneously. Hold the buttons depressed until the acoustic signal is heard and text is shown in the combined instrument panel.

The seat must be adjusted again before a new memory can be set.

The setting for lumbar support is not stored.

Using a stored setting

Press one of the memory buttons 1-3 until the seat and the door mirrors stop. If the button is released, the movement of the seat and door mirrors will be interrupted.

Key memory* in remote control key

All remote control keys can be used by different drivers to store the settings for the driver's seat and door mirrors1, see Remote control key - personalisation*.

Emergency stop

If the seat accidentally begins to move, press one of the setting buttons for the seat or memory buttons in order to stop the seat.

Restarting to reach the seat position stored in the key memory is performed by pressing the unlock button on the remote control key. The driver's door must then be open.


Risk of crushing! Make sure that children do not play with the controls. Check that there are no objects in front of, behind or under the seat during adjustment. Make sure that none of the passengers in the rear seat is in danger of becoming trapped.

Heated seats

For heated seats, see Heated front seats* and Heated rear seat*.

  1. * Option/accessory.
  2. 1 Only if the car is equipped with power seat with memory and power retractable door mirrors. The setting for lumbar support is not stored.

Related documents