Park assist camera*
The Park assist camera is activated either automatically, when reverse gear is selected or manually via the centre display - depending on the selected setting.
- The parking camera serves as an aid. It does not relieve the driver of responsibility when reversing.
- The camera has blind spots, where obstacles cannot be detected.
- Be aware of people and animals in the vicinity of the car.
The function can display a composite 360° view and separate views for each of the four cameras: rear, front, left or right camera view. The uppermost in the selected view denotes which camera is active.
360° view camera*
The four sides of the car are shown simultaneously in the centre display, which helps the driver to observe what is around the car when manoeuvring at slow speeds.
Every camera view can be activated separately by tapping on the screen on the desired camera's "field of vision" - e.g. in front of or above the front camera.
If the car is also equipped with Parking assistance* then distance to detected obstacles is illustrated with coloured fields in different colours.
The reversing camera shows a wide area behind the car and part of the bumper and the towbar, if present.
Objects shown in the centre display may appear slightly tilted — this is normal.
The front camera can be helpful on an exit road with limited visibility to the sides, e.g. when there are high hedges. It is active at speeds up to 25 km/h (16 mph) - following which, the front camera is switched off.
If the car does not reach 50 km/h (30 mph) but the speed falls below 22 km/h (14 mph) within 60 seconds after the front camera has been switched off, the camera is reactivated.
The side cameras show what is along each side of the car.