Controls - miscellaneous

Panorama roof* - operation

Updated 7/23/2018

The blind/roof is opened to maximum during automatic operation.

In ventilation position the front section of the roof is raised at the rear.

Warning

Children, other passengers or objects may be trapped by the panorama roof's moving parts.

  • Always operate the panorama roof with caution.
  • Do not allow children to play with the controls.
  • Remember to always switch off the power supply to the panorama roof by selecting key position 0 and then take the remote control key/PCC* with you when leaving the car. For information on key positions - see Key positions - functions at different levels.
P3-0835 XC60 Sliding panorama roof
Opening, automatic
Opening, manual
Closing, manual
Closing, automatic

The panoramic roof and sun blind can be operated in key position I or II.

Automatic operation

To fully open the sun blind - press the control back to the position for automatic opening and release.

To then open the panorama roof all the way - press the control rearward again to the automatic opening position and release.

Close the roof/curtain by repeating the preceding procedure in reverse order - press the control forward to the automatic closing position instead.

Rapid opening/closing

The panorama roof and sun blind can be opened/closed simultaneously:

  • To open - press the control rearward to the automatic operation position twice and release.
  • To close - press the control forward to the automatic operation position twice and release.

Manual operation

To open the sun blind - press the control backwards to the point of resistance for manual opening. The sun blind moves to fully open while the control is being pressed backwards.

To angle the panoramic roof - press the control rearward again to the point of resistance for manual opening.

To open the panorama roof - press the control rearward to the point of resistance for manual opening a third time. The panoramic roof moves to fully open while the control is being pressed backwards.

Close the roof/curtain by repeating the preceding procedure in reverse order - press the control forward to the manual closing position instead.

Note

For manual opening, the sun blind must be fully open before the panoramic roof can be opened. When the procedure is reversed, the panoramic roof must be fully closed before the sun blind can be closed.

Warning

Risk of crushing when panorama roof closes. The panorama roof's pinch-protection function only operates during automatic closing, not manual.

Ventilation position

P3-0835 XC60 Sliding panorama roof, tilt position

Ventilation position, vertically at the rear edge.

Open by pressing the rear edge of the control upward.
Close by pulling the rear edge of the control down.

When the ventilation position is selected the front section is raised at its rear edge. If the sun blind is fully closed when ventilation position is selected, then it opens automatically approx. 50 mm.

Closing using the remote control key or central locking button

P3-0835 XC60 Panorama roof from inside

Remote control key

Give one long press on the remote control key's lock button until the panorama roof and all the windows are closed and the doors and the tailgate are locked.

To interrupt closing, press the remote control key's lock button again.

Central locking button

The central locking button in the driver's door or passenger door* can be used to close the panorama roof.

Give one long press on the central locking button until the panorama roof and all the windows are closed and the doors and the tailgate are locked.

To interrupt closing, press the central locking button again.

Warning

If the panorama roof is closed with the remote control key or the central locking button, check that no one risks being trapped.

Pinch protection

The panorama roof has pinch protection that is triggered if the glass cover or the sun blind is blocked by an object during closing. In the event of blocking, the glass cover or sun blind stops and is then opened automatically to approx. 50 mm from the blocked position (or to full ventilation position). The pinch protection is also active when the glass cover or sun blind is opened.

There is the option to force the pinch protection when closing has been interrupted e.g. in the event of ice forming around the glass cover, by continually holding the control pressed forward or depressed until the glass cover is closed.


Did this help?