If the indicator lamp illuminates with a constant glow: Indication that the programming has finished.
Press the programmed button twice to activate.
If the indicator lamp flashes quickly: The device to be programmed to HomeLink® may have a security function that requires extra steps.
Test by pressing the programmed button twice to see whether the programming is working. Otherwise, continue with the following steps.
Depress and release the receiver's programming button once.
The programming must be completed within 30 seconds of the button being depressed.
Reprogramming individual buttons
Resetting the HomeLink® buttons
It is only possible to reset all HomeLink® buttons at the same time. Individual buttons can only be reprogrammed.