Attaching the towing eye
Use the towing eye to attach a winch wire when towing.
On the right-hand side of the car, the towing eye is screwed into a threaded socket behind a cover located on the front and rear bumpers.
If your car has a towbar there is no rear towing eye fastening.
Be sure to read about towing and its limitations before you start.Important
Fetch the towing eye so you have it at hand.
Attach in the front
Front towing eye fastening cover Push on the side of the cover to make it pivot. The cover can then be removed.
- Screw the towing eye all the way into the socket.It is important that the towing eye is firmly screwed into place. Putting something through the towing eye, such as a wheel wrench, can give extra leverage.
Important
After you're done, remember to remove the towing eye again and return it to its storage location. Make sure to put the cover back in place to protect the socket.