Seats, front - electrically operated
Electrically operated seat*
The power seats have overload protection which is tripped if a seat is blocked by an object. If this should happen, set the car's electrical system in key position I or 0 and wait a short time before adjusting the seat again.
Only one movement (forward/back/up/down) can be made at a time.
The seat can be adjusted for a certain time after unlocking the door with the remote control key without the key in the ignition switch. Seat adjustment is normally made in key position I and can always be made when the engine is running.
Seat with memory function*
The memory function stores settings for the seat and the door mirrors.
|Button for storing settings|
The seat must be adjusted again before a new memory can be set.
Using a stored setting
Press one of the memory buttons 1-3 until the seat and the door mirrors stop. If the button is released, the movement of the seat and door mirrors will be interrupted.
Key memory* in remote control key
If the seat accidentally begins to move, press one of the setting buttons for the seat or memory buttons in order to stop the seat.