Driver Alert Control (DAC)* - symbols and messages

Updated 23/07/2018

DAC can show symbols and text messages on the combined instrument panel or in the centre console's display screen in different situations.

Combined instrument panel

Symbol1	Message	Specification
	Driver Alert Time for a break	The vehicle has been driven inconsistently - the driver is alerted by an acoustic warning signal + text.
	Windscreen Sensors blocked	The camera sensor is temporarily disengaged. Shown in the event of snow, ice or dirt on the windscreen for example. Clean the windscreen surface in front of the camera sensor. Read about camera sensor limitations.
	Driver Alert Sys Service required	The system is disengaged. Visit a workshop if the message remains - an authorised Volvo workshop is recommended.

Symbol1

Message

Specification

Driver Alert Time for a break

The vehicle has been driven inconsistently - the driver is alerted by an acoustic warning signal + text.

Windscreen Sensors blocked

The camera sensor is temporarily disengaged.

Shown in the event of snow, ice or dirt on the windscreen for example.

Read about camera sensor limitations.

Driver Alert Sys Service required

The system is disengaged.

Visit a workshop if the message remains - an authorised Volvo workshop is recommended.

Symbol1	Message	Specification
	Driver Alert OFF	The function is disengaged.
	Driver Alert Available	The function is activated.
	Driver Alert Standby <65 km/h	The function is set in standby mode due to speed being lower than 65 km/h.
	Driver Alert Unavailable	The carriageway does not have clear side markings or the camera sensor is temporarily disengaged. Read about camera sensor limitations.