Trip computer - analogue combined instrument panel
The information from the trip computer can be shown in the combined instrument panel and operated with the controls on the left-hand stalk switch and with the combined instrument panel's menu.
Checking and settings can be made immediately after the combined instrument panel is automatically illuminated in connection with unlocking. If none of the trip computer's controls are actuated within approx. 30 seconds after the driver's door has been opened then the instrument extinguishes, after which either key position II or engine starting is required in order to operate the trip computer.
If a warning message appears when the trip computer is used then the message must first be acknowledged before the trip computer can be reactivated.
- Acknowledge the message by briefly pressing the indicator stalk OK button.
Trip comp. opt.
The trip computer display in the combined instrument panel can be shifted to another option at any time during the journey. One of the options means that no trip computer is shown.
|Trip computer heading in combined instrument panel||Information|
|Trip meter T1 and total dist.|
|Trip meter T2 and total dist.|
|Distance to empty||For more information - see the section "Range - distance to empty tank".|
|Fuel consumption||Current consumption.|
|No trip computer information.||This option shows a blank display and it also indicates the beginning/end of the loop.|
Resetting the trip computer
One long press on RESET resets the value for the selected heading.
Each heading must be zeroed individually.
Functions in the combined instrument panel's menu
The combined instrument panel's menu includes setting options for trip computer. Open the menu to check/adjust the functions in the table below.
|Shows the car's speed digitally in the centre of the combined instrument panel.|
|For a description of programming the timer, see Engine block heater and passenger compartment heater* - timer.|
|For more information, see Additional heater*.|
|Here you can activate the options that you want to be available as selectable headings in the trip computer. The symbols for the options already selected are white with a "tick" - others are grey and have no "tick".|
|Shows the number of months and mileage to next service.|
|For more information, see Engine oil - checking and filling.|
|For more information, see Messages - handling.|