Adding and editing time setting for preconditioning
The timer for preconditioning can manage up to 8 time settings.
Adding a time setting
Open the climate view in the centre display.
Select the Parking tab.
Press Timers.
Press Add new timer.
Note
It is not possible to add a time setting if there already are 8 settings entered for the timer. Delete a time setting in order to be able to add a new one.
Set a time for one or more days of the week. Activate/deactivate repetition by tapping on Repeat weekly.
Press Set timer.
The time setting is added to the list and is activated.
Warning
Do not use preconditioning if the car is equipped with a fuel-driven heater*:
- In unventilated spaces indoors. Exhaust gases are emitted if the heater starts.
- In locations with combustible or flammable material nearby. Fuel, gas, long grass, sawdust, etc. may ignite.
- When there is a risk that the heater's exhaust line may be blocked. For example, deep snow inside the front right-hand wheel housing can obstruct the heater's ventilation.
Remember that the preconditioning can be started by a timer that has been set for a long time in advance.
Editing a time setting
Open the climate view in the centre display.
Select the Parking tab.
Press the time setting that is to be changed.
A pop-up window is shown.
Edit the time setting in the same way as described in "Adding a time setting" above.