Important
The driver is always responsible for ensuring that the car is driven while using a lights mode that is suitable for the current driving conditions and local traffic regulations.
Primary lighting
You can choose between several different primary lighting modes in the centre display. Your selection sets a standard lighting behaviour.
![]() | Auto | The automatic lights mode1 allows your car to automatically detect and calculate which lighting mode is most suitable for the driving and environmental lighting conditions. |
![]() | Passing beam | You can manually select the passing beam to keep the front lights dipped. |
![]() | Position lights | The position lights are points of illumination around the car that make it more visible to other road users when your car is stationary.2 |
![]() | Off | Off deactivates all primary lighting modes.3 |
Note
Lighting mode availability
Some primary lighting modes can only be used under certain conditions, such as while driving or when your car is turned off.
Additional lights
You can control the high beam and the direction indicators with the left-hand steering wheel stalk.
The hazard warning lights help you to warn others of potential risks. You can turn them on or off by pressing the button in the display or the overhead console.
There are additional lights that can be enabled or adjusted in the display, such as:
Rear fog light | The rear fog light warns traffic behind you of your presence in poor light conditions. |
Auto-levelling works to automatically maintain vertical control of the beam. This means that whilst driving over raised ground or uneven surfaces, the lights adapt to cover the road surface.