Customised supportGet relevant information to your specific car.

Charging status in the driver display

The driver display shows the status for charging with both image and text. The information is shown for as long as the driver display is operating.
ColourStatusSpecification
Pulsating greenThe frame of the driver display is shown with a green pulsing light.Charging continues and an approximate time is shown for when the car will be fully charged.
GreenThe frame of the driver display is shown with a fixed green light.The car has finished charging.
RedThe frame of the driver display is shown with a fixed red light.

A fault has arisen. Check the charging cable's connection to the car’s charging input socket and power source.

Then restart charging in the following steps:
  1. Unplug the charging cable from the charging input socket.
  2. Wait for a short time.
  3. Plug the charging cable into the charging input socket again.
  4. If the problem persists – contact your Volvo dealer.
BlueThe frame of the driver display is shown with a fixed blue light.Scheduled Charging activated.
YellowThe frame of the driver display is shown with a fixed yellow light.Charging is waiting to start or paused charging.
In addition to showing charging status, the driver display includes the following:
  • existing1 and set amperage, as well as number of phases2
  • Charging power
  • Battery percentage
  • time until the car has finished charging.

 Note

If the driver display is not used for a while then it is dimmed. Activate the display again by opening one of the doors.

Read more in the section on driver display.

  1. 1The existing amperage that is shown in the driver display, for AC charging with more than one phase, is an average value.
  2. 2Existing and set amperage applies per phase from the alternating current source.

Did this help?