Cruise control* - managing speed

The cruise control (CC – Cruise Control) helps the driver to maintain an even speed. It is possible to activate, set or change the speed.
P4-1220-Farthållare Rattknappar u LIM
Steering wheel keypad and combined instrument panel.
  1. Ikon röd cirkel 1Cruise control - On/Off.
  2. Ikon röd cirkel 2Standby mode ceases and the stored speed is resumed.
  3. Ikon röd cirkel 3 Standby mode
  4. Ikon röd cirkel 4Activate and adjust the speed.
  5. Ikon röd cirkel 5Selected speed (GREY = Standby mode).
  6. Ikon röd cirkel 6Cruise control active - WHITE symbol (GREY = Standby mode).

Activating and setting the speed

To enable cruise control:

  • Press the steering wheel button P3-820 Ikon farthållare 1
>The cruise control symbol in the combined instrument panel changes from WHITE to GREY and shows that the cruise control is in standby mode.

To activate cruise control:

  • At the required speed - press the steering wheel button Ikon farthållare 2 or Ikon farthållare 3.
>The current speed is stored in the memory and the combined instrument panel's marking (5) is illuminated/turns WHITE at the selected speed.

 Note

Cruise Control cannot be enabled at speeds below 30 km/h.

Changing the speed

To change the stored speed:

  • Adjust with short presses on Ikon farthållare 2 or Ikon farthållare 3 - every press gives +/- 5 km/h. The last presses made are stored in the memory.

To adjust +/- 1 km/h:

  • Hold the button depressed and release it at the desired speed.

A temporary increase in speed with the accelerator pedal, e.g. during overtaking, does not affect the cruise control setting - the car returns to the set speed when the accelerator pedal is released.

 Note

If any of the Cruise Control buttons are held depressed for several minutes then it is blocked and deactivated. To be able to reactivate Cruise Control, the car must be stopped and the engine restarted.
  1. * Option/accessory.