Rectifying low tyre pressure with tyre monitoring*
Check and rectify the tyre pressure when the indicator symbol for ITPMS is illuminated and the message Tyre pressure low is shown. Calibrate ITPMS after the tyre pressure has been adjusted.
Inflate the tyres to the correct pressure as indicated on the tyre pressure label on the door pillar on the driver's side.
In some cases, it may be necessary to drive the car for a few minutes at a speed above 30 km/h (20 mph) in order to extinguish the ITPMS symbol and clear the message.
Note that the ITPMS symbol does not extinguish until the low tyre pressure has been rectified and new calibration has been performed.
Note
Note
- After a tyre has been inflated, always refit the dust cap in order to avoid damage to the valve from gravel, dirt, etc.
- Only use plastic dust caps. Metal dust caps can rust and become difficult to unscrew.
Warning
- Incorrect tyre pressure may lead to tyre failure, which could result in the driver losing control of the car.
- The system cannot indicate sudden tyre damage in advance.