Adjusting the head restraints in the rear seat

Adjust the head restraint for the centre seat

The centre seat's head restraint must be adjusted according to the passenger's height so that, if possible, the whole of the back of the head is covered. Slide it up manually as required.

To lower the head restraint, the button (see illustration) must be depressed while the restraint is carefully moved down.

Fold down the rear seat's outer head restraints via the centre display*

The outer head restraints can be retracted via the centre display's function view. You can lower the head restraints in ignition position 0.

Press the Headrest Fold button to activate/deactivate lowering.

Move the head restraint back manually until a click is heard.

 Warning

Do not lower the outer head restraints if there are passengers in any of the outer rear seats.

 Warning

The head restraint must be in locked position after being folded up.

Fold down the rear seat's outer head restraints using handles

For cars with electronically controlled rear seat folding*, the outer head restraints can be folded using handles on the top side of the seat, see figure . For cars without electronic folding, the outer head restraints are folded manually using the inner control on the upper side of the seat; see figure .